Meters are used in many of the LiveMine app modules to record machine statistics related to utilisation and service time tracking. They are all contained in this table back end location.
Add a Meter
To add a new Meter, click on the
button.
Select a Unit from the drop down list.
This list is populated in the Mine Management - Unit of Measure table.
Note that if necessary, a new Unit can be added to the Units table by clicking on the
button and completing the field details. BUT it is advisable that Unit table editing be done while viewing the Unit section of the back end.
Fill out the name details.
The Can Only Increase checkbox ensures that the value can only increase above the previous known entry for this Meter on a particular machine. It is a customary use checkbox.
Click save to finish.
Editing a Meter entry
To edit an entry, click on either of the
buttons.
Make your changes, and click save.
Entries can be made inactive and sent to the inactive list by clicking the
button.
Click on the
toggle button to see the list.
Entries listed here can be re-enabled again by clicking the
button.
The
button allows for viewing and editing of where this Meter is mapped to specific Equipment Models.
Mapping a Meter to a Model
When in the Edit Meter window it is possible to assign the Meter to one or more Equipment Models.
To add a Meter to an Equipment Model, click on the
button.
Select an Equipment Model from the drop down list.
It is possible to add a new Model to the Equipment Models list by clicking the
button. NOTE that this is not advisable. It is recommended that all Equipment Model entry editing be done through that section of the back end.
Select whether the Meter needs to be recorded at the Start of Shift, End of Shift or both.
Click Save to finish.
It is possible to export any of these lists to an excel csv document by clicking on the
button. A csv file will be created and sent to your Windows Downloads folder.